Where does the CNC carving machine manufacturer need to start the maintenance of the carving machine?

1. The maintenance cycle of the precision carving machine equipment is generally set as 3 months for maintenance once.

2. Disassemble the X-axis shield, clean up the chips and dirt on the lead screw and guide rail (using silk cloth), and keep it dry and tidy.

3. Disassemble the Z-axis shield and the connecting plate shield, clean the chips and dirt on the lead screw and guide rail, check whether the Z-axis connecting plate is loose, check whether the drag chain connecting plate is loose, and check the X-axis origin switch hitting plate and Whether the position of the stroke limit switch has changed and whether the screw is loose.

4. Remove the Y-axis upper guard plate or shield, clean the lead screw, guide rail, chips and dirt, and the waste under the workbench. Check the Y-axis origin switch and travel limit switch wiring. Loose, whether the connection is reliable.

5. Check the connection of the connecting cable.

6. ​​Enter JDTEST to detect the status of each signal bit and the characteristics of each axis's motion trajectory. After confirming that it is correct, it will run continuously in EN3D for 30 minutes. The normal operation indicates that the regular maintenance is completed!

Carving machine manufacturers need to pay special attention to the daily maintenance. Regular maintenance is also something that must be done for machine tool maintenance. Operators need to learn and summarize more maintenance skills of the carving machine. When they are implemented in the work, the life of the machine tool will be greatly extended. Daily work can also be carried out for a long time, and the quality and processing efficiency of processed products are guaranteed.